Fast forward to November 2002 and a posting on aircraftresourcecenter.com. A modeler had just finished a Hellcat in the colours of a Navy drone from 1946. It was international orange with white tail surfaces – truly a scheme to brighten any collection.

In 1946 the US government began a series of atomic tests in the South Pacific, specifically on the Bikini Atoll of the Marshall Islands. Two tests were carried out; ‘ABLE’ and ‘BAKER’ using bombs similar to the Fat Man dropped on Nagasaki the previous year. ‘ABLE’ was air dropped while ‘BAKER’ was detonated below the lagoon’s surface. As part of the scientific study both the US Army and US Navy flew manned and unmanned aircraft throughout the tests with the unmanned drones carrying out the more hazardous missions – including flying into the mushroom cloud.

A local hobby shop was selling a bunch of Hasegawa and Tamiya kits at about 30 to 40% off (aren’t discount bins great?), so I picked up the Hasegawa F5F-5 Hellcat and immediately set to work. Overall the Hellcat matches most of Hasegawa’s other releases, medium grey plastic, fine engraved panel lines and reasonably decent fit. As I studied the kit I concluded construction shouldn’t pose a problem.

I started by assembling most of the cockpit, leaving the instrument panel and side consoles off until I’d painted the rest interior green. I’m content with the way the interior looks, there is room for improvement but I kept my canopy closed. The fuselage and wings fit reasonably well, I did need some liquid putty to all the seams and smooth them with a sanding stick. The worst fit occurred when I glued the wing and the fuselage together. A fine bead of Squadron white putty had to be applied around the upper joints, which a good portion of liquid and Squadron putties were needed on the aft, lower joint. There were no surprises or difficult areas as I continued to build the Hellcat. I installed the canopy, tails and landing gear before painting.

I sprayed the tail sections with Model Master’s flat white enamel, allowed it to dry and masked. I then airbrushed the rest of the model, including the landing gear and wheel bays with Model Master’s International Orange. When finished, I added a touch of white paint and airbrushed the upper surfaces in a representation of fading paint.

Markings for the Operation Crossroads Hellcat came from the spares box. Aeromaster US insignia and some generic numbers, nothing fancy.

In addition to the faded orange paint, I added some oil streaks and exhaust stains around the engine. The idea of these drones was to gather information and return not get destroyed. As such, they would perform a number of flights.

I’m happy with my orange Hellcat. The kit was easy to build and posed no trouble for novice builders. The colour scheme gives my not only a non-blue Grumman Cat but also brightens my display case at home.